Schubert Preludio Manual Del Usuario página 32

EN
32
Sustain pedal: prolongs the lasting time of a pitch.
•
Press and hold the sustain pedal to enable the sustain effect, and release
the pedal to disable such effect.
Note: This function is only supported if an additional pedal part with
1 or 3 pedals is connected.
Damper pedal: prolongs the lasting time of the pressed key.
•
Press and hold the sustain pedal to enable the damper effect, and release
the pedal to disable such effect.
Note: This function is only supported if an additional pedal part with
3 pedals is connected.
Transpose
The transpose control function of the keyboard is adjustable from "­6" to "+6",
and the default setting is "0".
• Press the [FUNCTION] button (4) and the [TRANSPOSE] selection keys [-]
and [+] (17) to adjust the transpose value within ±6.
The transpose function saves the trouble of raising and lowering the key when
playing on the keyboard. You can play songs in every key in the same way as
that for playing songs in key C. It may decrease the key by half­step (minor
second), thus the keys positions for key C is changed to those for key B.
• Press the [TRANSPOSE +] button to increase all keys by half­step (minor
second). In this case, the tone of the key position of key C is changed to key
C# or key Db.
• If the [TRANSPOSE +] button is pressed for twice, key C will decrease to
Bb.
• If the [TRANSPOSE +] button is pressed for fifth times, key C will decrease
to key F.
• Press the [TRANSPOSE +] and [TRANSPOSE -] buttons simultaneously to
reset key C.