Operation Instruction - TAKARA LE FUTE RF10 Manual Del Usario

Charging state display: When the product is charging, the blue star will be flickering. When the
9
charging is completed. The blue star will be normal on. When the charger is not connected, the blue
star will not be displayed.

Operation Instruction

Button Function
Alert
Press "M"1Times
Setting
Press "M"2Times Alert Tolerance
Overspeed
Press "M"3Times
Setting
Brightness
Press "M"4Times
Setting
TimeZone
Press "M"5Times
Setting
RF10 User Manual
Description
After entering the setting interface, the voice will prompt"Alert Setting". Press
"<"or ">" to set ON or OFF. If it is set OFF, it will only have prompt on over
speed condition or at the shooting locations. If it is set ON, it will have voice
prompt at any POI Point.
After entering the setting interface, the voice will prompt "Alert Tolerance ". The
LED will display setting value. Press "<"or ">" to set +5, +10, +15, +20, +25,
+30 km/h ＋０KM， -5, -10, -15, -20, -25, -30 km/h，+0KM. For example, if it
is set to be 30KM/h，and the speed limit of the shooting location is 40KM/h，the
product will have voice prompt when the vehicle speed is to 70KM/H.
After entering the setting interface, the voice will prompt "Overspend setting ".
The LED will display setting value. Press "<"or ">" to set with reduction or
increasing of 10KM/H. The product will prompt setting value, limit speed OFF
and 40~180KM/H with voice at the same time.
After entering the setting interface, the voice will prompt"Brightness Setting".
Press "<"or ">" to set LED brightness. It can be set with no brightness，
Brightness 1，Brightness 2 or Brightness 3 with voice prompt.
After entering the setting interface, the voice will prompt "TimeZone setting" to
set different time zones. Press "<"or ">" to adjust time with -12、 -11、 -10、 -9、
-8、-7、-6、-5、-4、-3、-2、-1、+0、+1、+2、+3、+4、+5、+6、+7、+8、
+9、+10、+11、+12 and +13 hours.
26
LED Display