TAKARA LE FUTE RF10 Manual Del Usario página 27

Press"<"or ">" Volume Setting
Press and hold "<"
POI Data Deltel
+ "> "2Seconds
Press and hold "<"
+ Reset
"M"+"> "2Second settings
s
Press and hold POI
"M" 2Seconds Button
Press and hold Battery
">"2Seconds inquiry
Press "<"+">" Exit
speed
（ Short press two
measuring
buttons at the same
display state
time ）
NO Press any Key Back
Function
After entering the setting interface, the LED will display setting value. Press
"<"or ">" to set volume from minimum to maximum with 5 grades with "Di"
voice to prompt present volume. The LED will display 01， 02， 03， 04， 05. (01
is the minimum volume, and 05 is the maximum volume.
Press and hold "<" + ">"2Seconds after starting the product within 10 SEC, and
it can delete all POI data. Note: To prevent mistaken deleting, it is effect only
when deleting function is executed within 10 SEC after staring the product. If
the data need deleting when using, the product need starting again to execute
deleting function. After deleting is completed, the product will prompt that the
data has been deleted.
To restore the menu parameters of factory setting.
factory
Record data of present location (POI) and prompt with voice: the data has been
Record recorded.
power Inquiry current battery power and prompt with voice. It can be divided into 4
grades, i.e. full power level, sufficient power level, normal Power, low power
level.
regional When entering speed measuring region, the screen will display the average speed
on the travelling road. If other states need inquiring, press M key. It will alter to
average speed condition automatically if there is no operation longer than 7 SEC.
to Under any menu, the product will back to working interface if there is no
operation longer than 7 SEC.
RF10 User Manual
27
Delete Failure
Successfully
Deleted