AmazonBasics B079LL22TC Manual De Instrucciones

Bathroom Handicap Grab Bar
Barre d'Appui de Salle de Bain
Badezimmer-Haltestange
Maniglione di Sostegno Per Bagno
Barra de Sujeción para Baño Adaptado
Wandbeugel voor Badkamer
障害者用バスルームグラブバー
B079LL22TC, B079LD8CRV, B079LLSFB2, B079LKHX1V, B079L7MRD9, B079LL4527, B079L9X9L4,
B079L7MXTK, B079LKQNWP, B079L9X9LJ, B079L7MRDY, B079L6LY1 V, B079LL452W, B079LJZF95,
B079LKNJT9, B079L9X9M4, B079L6LY25, B079L9TH6V
1
A
3
EN
Caution
This product contains small items that could be a choking hazard if swallowed. Keep
these items away from young children.
• Make Sure these instructions are read and completely understood before
attempting installation. If you are unsure of any part of this installation, please
contact a professional installer for assistance.
To reduce the risk of injury, thoroughly read and understand all
WARNING
safety information and instructions provided in this manual. If you do not understand
any of the safety information or installation instructions contact a professional for
assistance before attempting to install.
Install in accordance with these instructions only. Do not attempt to
WARNING
modify or alter this product. After installation, check your grab bar periodically to
ensure all screws are tight. Retighten if loose.
All screws must be mounted directly and firmly into a wood
WARNING
stud. Locate the middle of the stud by using a stud finder or other stud
finding method (Studs are usually 16" on center).
IMPORTANT The manufacture will not accept responsibility for any injury
or any damages cause by the lack of wall strength or improper installation.
Follow instructions along with line drawings in the AmazonBasics
installation guide.
Step 1: Remove grab bar covers.
IMPORTANT Use a stud finder to locate the center point of the stud.
Loosen the grab bar covers from the base by gently twisting and tapping
from the bottom of the mounting base.
2
4 5
A
B
Step 2: Locate stud(s) and position grab bar. Using a level, place the grab bar on
the wall in your desired location. Ensure that the mounting holes are
positioned over a wood stud.
Step 3: Mark mounting location. Using a pencil, mark the screw mounting locations.
Step 4: Drill screw mounting holes. Place grab bar aside and drill pilot holes as
marked by your penciled locations.
IMPORTANT Ensure holes are drilled into wood stud.
Step 5: Mount and secure the grab bar to the stud. Slide the grab bar covers back
over the mounting plates.
Warranty Information
To obtain a copy of the warranty for this product:
US: amazon.com/AmazonBasics/Warranty
UK: amazon.co.uk/basics-warranty
US: +1-866-216-1072 / UK: +44 (0) 800-279-7234
Feedback and Help
Love it? Hate it? Let us know with a customer review.
US: amazon.com/review/review-your-purchases#
UK: amazon.co.uk/review/review-your-purchases#
US: amazon.com/gp/help/customer/contact-us
UK: amazon.co.uk/gp/help/customer/contact-us
1/8" (3.3 mm)
A