CAME 001CS1BNC0 Manual Del Usuario página 7

Disabling the ring
To disable the ring, press the button
disabled for all call types. Press the button
Intercommunication
Calling extensions
INTERCOM 1/3
INTERCOM 2/4
BIANCA 1
BIANCA 1 BIANCA 2
BIANCA 1
BIANCA 2
Call transfer
BIANCA 1
BIANCA 1
BIANCA 1
Press the relative buttons to call extensions 1 and 2 (3 or 4).
BIANCA 2
BIANCA 1 BIANCA 2
BIANCA 2
BIANCA 2
BIANCA 1
BIANCA 2
until the corresponding LED lights up. The ring will be
to adjust the volume of the ring again.
After selecting the desired extension, the caller will emit
a line free tone, while the receiver called will ring with the
chosen tone.
To activate audio communication, press the button
the receiver.
During a conversation between extensions, a call from an
entry panel is signalled to the receivers by a beep, which
is repeated every 5".
3 beeps in a row indicate that it is not possible to make
calls because the line is busy.
BIANCA 1
With an active communication, select the exten-
sion you wish to transfer the call to (the caller will
emit a line free tone, while the receiver called
will ring with the chosen tone). To activate au-
BIANCA 1
dio communication, press the button
receiver.
Once the audio connection is established with
the desired receiver, press
The receiver of the call can transfer it back.
BIANCA 1
BIANCA 1
on
BIANCA 1 BIANCA 2
EN
BIANCA 2
BIANCA 2
on the
to transfer the call.
BIANCA 1
BIANCA 2
BIANCA 2
3