One for All URC-7960 Manual Del Usuario página 5

URC-7960_WEB-manual_ENG_10feb10:URC-7960 12-02-10 10:24 Pagina 4
You can program your ONE FOR ALL to issue a sequence of commands at the press of one single key. Any sequence of commands you regularly use can be reduced to one key press for
your convenience.
For example, you may want to create the following macro:
1st command:
2nd command:
3rd command:
To set up the Macro mentioned above on the e.g. "Red" key on your ONE FOR ALL:
1
3 sec.
Press and hold the magic key for 3 sec.
2
Press 9 9 5.
3
Press the key to which
the function will be
assigned (e.g. red key).
4
< select >
Select the
corresponding
device e.g. dvd
5
Press the STOP key
6
Press the POWER key
dvd --> STOP
dvd --> OFF
tv --> OFF
x2
--> The Blue ring will light up twice
x2
--> The Blue ring will light up twice
Macro
7
< select >
Select the
corresponding
device e.g. tv
8
Press the POWER key
9
3 sec.
Press and hold the magic key for 3 sec.
Congratulations! You have successfully programmed a macro on the "red" key.
NOW, when you press the red key: 1st: dvd will STOP, 2nd: dvd switches OFF,
3rd: tv switches OFF. The remote will do this in every device mode whenever you
press the red key.
Press the red key
How to reset the macro key to obtain its original function?
1) Press and hold magic key for 3 sec. --> The Blue ring will light up twice.
2) Press 9 9 5.
3) Press the corresponding macro key (e.g. the red key).
4) Press and hold magic key for 3 sec. --> The Blue ring will light up twice.
4
x2
--> The Blue ring will light up twice
OFF
STOP
& OFF
DVD DVD
Command 1: dvd STOP
Command 2: dvd OFF
Command 3: tv OFF