Product Installation - Hkoenig STM45 Manual De Utilización

PRODUCT INSTALLATION

Take out the appliance from the giftbox and spread the power cord
Take out the supporting bar; Insert the supporting bar to the right hole of base, then locking it
Put commodity shelf at the top pole, it can be adjusted the appropriate height if needed.
Take out hanger and assemble the hook to the left side of hanger. Then insert the hanger from top of
support pole.
Lift down the hood of connecting hole, take out the ironing brush, align the plug of ironing brush with
and insert it into the corresponding hole on machine body, and tighten it clockwise. After using,
please pull out the ironing brush and cover the hood.
If required, take out the fur brush, align the plastic clasps at bottom of fur brush with and grip it into
the metallic snap close at the bottom of ironing brush. The dismounting is in a reverse order.