Publicidad
• When installing or uninstalling the wall mount support frame, make sure 2 people work on it, and the TV is off.
• Use a flat table when installing the wall mount. Use the TV packing material (cushion) for curved TVs.
Flat TV
• Install the wall mount only on the wall that is larger than the TV and is not tilted. After installation, the cover or
attachment at the bottom of the TV must touch the wall. Otherwise, the wall mount must not be installed.
Wall that is larger than TV
(Installable)
• Before mounting the TV to a wall, connect the power cable and One Connect cable to the TV.
• Use the included 3 m power cable if the wall-mounted TV and power socket are more than 1.5 m apart.
• When installing / uninstalling the wall mount, be careful not to damage the optical cable. Especially, be careful not
to step on the optical cable.
• Use a screwdriver to assemble the TV to the support frame. Using an electric screwdriver may cause screw threads
to wear out.
• The minimum distance between the TV and wall may be 2-3 mm or more depending on the wall surface or
installation conditions.
• The distance between the wall and the left or right side of the TV may differ depending on the wall and installation
conditions.
• When installing the wall mount, if the TV is too close to a wall, scratches may occur on the back of the TV or on a wall.
• A lot of force is required to open the bracket before installing the wall mount. Be careful not to hurt yourself when
opening the bracket. (Brackets with tilt options are difficult to open because they need to withstand the weight of
the TV.)
Tilted wall
(Not installable)
- English 3 -
Curved TV
Wall that is not larger than the
wall mount
(Not installable)
Publicidad
