Maintenance
8
a Nozzle
(Remove it while pressing the nozzle
release button.)
Wash with water and wipe with a cloth.
•
Please replace the nozzle about once
every 6 months. If the tip of nozzle gets
deformed, please replace with a new
nozzle. Failure to do so could result in
malfunction.
b Main unit
Remove the dirt by wiping using a cloth
with liquid soap, and wipe off using a dry
cloth.
Wash with water if it is very dirty.
•
Do not wipe the appliance with
thinners, benzine, alcohol etc.
•
Doing so could result in malfunction,
cracking or discoloration of the parts.
•
Do not wash using hot water of over
50 °C.
•
Do not leave the appliance submerged
in water.
•
Dry after washing with water.
c Water suction tube
Dry after washing with water.
•
Do not bend the water suction tube.
Failure to do so could result in
malfunction such as disruption in the
operation of the water suction tube.
d Tank
It will come off when the body is pulled
hard while the water supply cap is
removed, so perform maintenance of
interior as well.
Wash with water and wipe with a cloth.
•
Wash the dirt off from inside using a
brush or similar, and wipe off with a
cloth.
•
Dry the tank when not using for a long
period.
e Water supply cap
Wipe off any grime and dirt.
•
Failure to do so could result in water
leakage.
Charging adaptor
Wipe the metal part of the power plug
with a dry cloth once every 6 months.
•
Only use mild detergent.
•
Never use thinners, benzine, or alcohol
since it may cause malfunction or
cracking / discoloration of the parts.