Osd Menu Functions - Westinghouse LCM-22w3 Manual Del Usuario

OSD Menu Functions

All the function settings for this LCD monitor are controlled via the control keys located on
the side of the monitor. To display the OSD main menu, press the "Menu"
button on the control panel. (Note: The OSD menu display will disappear automatically
after approximately 10 seconds, if no action is taken.)
This LCD monitor has been adjusted to optimal settings before shipment. If needed,
adjustments to the monitor settings can also be made using the OSD menu.
Press the "Menu"
/
Press the Turbo
Color, Miscellaneous, and Information Sub-Menus).
Press the / button to enter the sub-menu.
Press the Turbo/ or Auto/
Press the / or
To go back to the previous menu, press the
automatically.
To exit the OSD menu press "Menu"
that have been made.
Image Menu
Audio Menu
Color Menu
Miscellaneous Menu
Info Menu
NOTES:
Any changes are automatically saved in memory when the OSD turns off. Turning off
the power should be avoided while using the OSD menu.
Adjustments for clock, phase, and positions are saved for each individual signal timing.
Except for these adjustments, all other adjustments have only one setting, which
applies to all signal timings.
The icon color will change from gray to blue when a sub-menu is selected.
button to display the OSD.
or Auto/ button to scroll through the sub-menus (Image, Audio,
button to select the function to be adjusted.
/ buttons to change the current setting of the sub-function.
again. It automatically will save any changes
10
button. Changes are saved
Resolution & Frequency
keypad
Source