Snap-On Polartek Dual EEAC334 Manual Del Usuario página 24

R1234yf
Put a SAE J2913 compliant
leak detector set to
xxxxx
xxxxx high-maximum sensitivity
(4g/year) into the center of a
floor duct outlet, as far as
xxx
possible
PRE-CHARGE TEST
R1234yf
Was an auxiliary
evaporator check
xxxxx
performed?
xxxxx
YES
xxx
PRE-CHARGE TEST
R1234yf
Was a leak found?
xxxxx
xxxxx
YES
xxx
PRE-CHARGE TEST
R134a
Gas charged xx lb
Tank pressure xx psi
xxxxx
A/C pressure xx psi
Tank temperature xx °F
xxxxx
xxx
CHARGE
mm/dd/yyyy
hh:mm
mm/dd/yyyy
hh:mm
NO
mm/dd/yyyy
hh:mm
NO
mm/dd/yyyy
hh:mm
• 24 •
R134a
Disconnect HP coupling Start A/C
system with LP coupling connected
and press ENTER
xxxxx
xxxxx
xxx
CHARGE
R134a
Disconnect LP coupling, from A/C
system and Press ENTER
xxxxx
xxxxx
xxx
CHARGE
R134a
Empty hoses
Hoses pressure xx psi
xxxxx
xxxxx
xxx
EMPTY HOSES
R134a
End Of Procedure
xxxxx
Gas recovered xxx lb
xxxxx
Oil discharged xxx oz
Vacuum time xxx min
Gas charged xxx lb
xxx
Press ENTER to continue
EMPTY HOSES
mm/dd/yyyy
hh:mm
mm/dd/yyyy
hh:mm
mm/dd/yyyy
hh:mm
mm/dd/yyyy
hh:mm