Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
EN
• Make sure that when inserting Li-Ions battery-pack, positive
pole points outward
• Handle with care when inserting the sliding-element, that
sliding-element won´t get jammed! The sliding-element must
slide easily when inserted.
• To avoid undesired activation, you may place the
battery-pack reversed (positive pole inwards).
3. Push the sliding-element (01), until the ball (02) snaps into place.
6.2.0 Inserting pick-needle
05
06
To insert the pick needle proceed as prescribed:
1. Open the clamping screw (07) with the included Allen key.
2. Place the pick needle (05) so that it completely flushes with the needle-
clamping system (06).
3.Asjust clamping-screw (07) with the Allen key until needle is pulled tight..
Now the MULTIPICK MHP II is ready for use.
6.3.0 Working with the MULTIPICK MHP II
6.3.1 Switch ON and OFF the MULTIPICK MHP II
09
07
08
8
Publicidad
Tabla de contenido
