Dcf Receiver Version; Dhw (869 Mhz) Receiver Version; Ntp Receiver Version; Lighting Option - Gorgy Timing HanDi 300 Modo De Empleo

4.2.3. DCF RECEIVER VERSIOn

► insert the batteries into the housing under the movement.
☛
The hands are positioned at 12 o'clock and then, 3 to 4 minutes after
receiving the code, are positioned according to the received time information.

4.2.4. DhW (869 Mhz) RECEIVER VERSIOn

► Change the switch on the outside of the unit onto the "On" position.
☛
The hands are positioned at 12 o'clock and then, 2 to 3 minutes after
receiving the code, are positioned according to the received time received.

4.2.5. ntP RECEIVER VERSIOn

a/ 230VaC version
► Connect the clock to the Ethernet network.
► Connect the clock to the mains.
► Change the switch position on the outside of the unit onto the "On" position.
B/ POE version
► Connect the clock to the POE injector.
► Change the switch position on the outside of the unit onto the "On" position..
☛
The hands are positioned at 12 o'clock and then, 3 to 4 minutes
after receiving the code, are positioned according to the received time

4.2.6. LIGhtInG OPtIOn

► Connect the LED lighting supply cable to the mains.
☛
40
information. For the advanced configuration,
see section 5. WEB INTERFACE.
In POE version, the LED lighting is powered directly
by the network cable.
MDE-HANDI-2078V2.0