Encryption Keys; Outputs Settings - Gorgy Timing HanDi 300 Modo De Empleo

5.1.4. Encryption keys

► This page lets you enter the encryption key of the servers. These keys are used in
the nTP settings (see section 5.1.3. nTP settings).

5.1.5. Outputs settings

► use this page to set manually the time on the clock. The user can also choose
whether the clock continues to run if it loses the time information.
► The last parameter configures the time displayed on the clock relative to UTC
time.
For example: For France, enter the last two fields as follows:
► Offset from uTC : + 1 : 0
► DsT : European union
MDE-HANDI-2078V2.0 45