Unique Features - NEO ION 575 Manual De Usuario

6. UNIQUE FEATURES

• RDM, stand for "Remote Device Management",
with this function, users can realize remote
control of the device, such as remotely chang-
ing DMX address, reverse pan/tilt setting, check
a lot of useful information such as temperature,
power consumption, fan speed. Etc. Every
single device has a unique RDM code before left
factory to distinguish from each other, usually
not suggest users change this code freely.
• Software upgrade function via DMX cable, if
there is any new firmware for this device come
out, it can be upgraded simply via a software
upgrade box, no need to change any mechan-
ical parts. The upgrade box is not included in
the package, if need any further assistance pls
just contact authorized dealers.
• Hibernation, the device will enter sleeping
mode if activated after a period of disconnect-
7. DIMENSIONS DRAWING
ing DMX signal to save the power consump-
tion, and will return immediately as soon as
the DMX signal is sent again.
• Display battery, this function is prepaid in
the display PCB, users just need to install
a normal 10440 600mAh 3.7V rechargeable
lithium battery, then users could power on
the display and do setting without connect to
main power.
• Display back-up communication IC, there is
a back-up communication IC installed in the
display PCB, so users could replace at once
if the working one is broken, no need to wait
long time from service.
• Display flip, by press up and down button for
more than 3 seconds, the display will flip auto-
matically, this function is useful to read menu
conveniently when device is hanged.
P. 15
English version - Neo ION 575