ATON DHSIP SOURCE INPUT WALL PLATE Manual Del Usuario página 18

DHSIP Source Input Wall Plate
DH46X Digital Audio Router
When utilizing the DHSIP as a means to connect
an audio source to a DH46X Digital Audio Router in
Stand-Alone mode, rear connections consists of plug-
ging in a Cat-5 wire terminated to an RJ-45 connector
wired to T-568A standard to the RJ-45 jack on the
rear of the DHSIP. The other end simply plugs into
the SOURCE LOOP IN RJ-45 jack on the rear of the
DH46X. See Figure 3.7 for details.
DHSIP
Side View
Cat-5
DH46X Rear
Figure 3.7: DHSIP to DH46X - Rear Connections
16 ©2008 • All rights reserved.