ATON DHSIP SOURCE INPUT WALL PLATE Manual Del Usuario página 21

DHSIP Source Input Wall Plate
Setting
All Down
DIP Switch 1 & 3 UP
DIP Switch 2 & 4 UP
DIP Switch 1, 2, 3 & 4 UP
Try each setting and monitor the CLIP LED until it
does not illuminate.
7. Mount the DHSIP and install Trim Ring.
Note: GAIN adjustment must be set for both
Right and Left Inputs. Both settings should be
the same.
© 2008 • All rights reserved.
Function
No GAIN
+4dB GAIN
+8dB GAIN
+10dB GAIN
19