Options During A Call; Adjusting The Call Volume; Switching Your Microphone Off (Mute) Or On (Speak); Switching Your Phone's Microphone Off - AT&T Pantech C150 Manual Del Usuario

reconnected to you.

Adjusting the call volume

To adjust the earpiece volume during a call, do one of the
following.
• To increase the call volume during a call, press the [Up]
volume key on the left side of your phone.
• To decrease the call volume during a call, press the
[Down] volume key on the left side of your phone.
• In Standby mode, adjust the ringtone volume and set
vibrate mode and silent all mode by using the [Up/Down]
keys.
Switching your microphone off
(Mute) or on (Speak)
You can temporarily switch your phone's microphone off so
that the person you talk to on your phone cannot hear you.
For example, you may wish to say something to another
person in the room but do not want the person calling to
hear you.

Switching your phone's microphone off

Press the [Mute] Soft key.

Options during a call

Switching your phone's microphone
back on
Press the [Unmute] Soft key.
Putting a call on hold, and returning
to a held call
You can place the current call on hold whenever you want.
You can also make another call while you have a call in
progress if your network supports this service.

Putting a call on hold

Press the [Options] Soft key then select [Hold], or press the
[ ] key. The callers name and icon are grayed while the
s
call is on hold.

Returning to a held call

Press the [Options] Soft key then select [Retrieve], or press
the [ ] key again.
s

Making a call while you are on a call

❶ Enter the phone number that you want to dial or look it
up in Address Book entry.
❷ Press the [ ] key to dial the second call. The first call is
s
automatically put on hold.
29