Backlight; Audio; Shop Tones; Ringtone - AT&T Pantech C150 Manual Del Usuario

Settings
displayed in Startup or Idle mode.
Press the [Menu] Soft key, select 9.Settings, select
1.Display, and then select 3.Greeting.

Backlight

This function allows you to specify for how long your
phone's displays are backlight.
❶ Press the [Menu] Soft key, select 9.Settings, select
1.Display, and then select 4.Backlight.
❷ Choose how long you want backlighting of your phone's
displays to remain on if you do not touch any key. You
can choose 5 Secs, 10 Secs, 20 Secs, 1 Min, and 10
Mins.
❸ Press the [Left] or [Right] scroll key to change the
duration value that you want and then press the [o]
key.

Audio

You can define how sound is played on your phone. Press
the [Menu] Soft key, select 9.Settings, and then select
2.Audio. Sounds define how your phone reacts when you
receive a call or a message, how your keypad sounds
when you press a key, and more. You can either leave the
default ringtone, key tone, and other settings, or you can
78
personalize them to your needs.

Shop Tones

Selecting this menu launches the Web browser to AT&T's
Tone menu.

Ringtone

Press the [Menu] Soft key, select 9.Settings, select 2.Audio,
and then select 2. Ringtone. Select the preferred ring type,
melody to ring.
•Ring Type: Specify how your phone rings or vibrates
when you receive calls. You can choose Ringing Tone,
Vibrate, Vib then Ring, Vib and Ring, Ascending, or
Silent.
•Sound: Sound is composed of several groups such as
Melody Sound, and User Sound. Each group has multiple
tones. User Sound presents the melody that results when
you press the [Menu] Soft key, select 7.My Stuff, and then
select 1.Audio.
NOTE
You can not set an audio file as a ringtone, if it is larger
than 600Kb.

Volume

Specifies how loudly your phone rings.