Hamilton Beach 78220 Manual Del Usario página 8

How to Vacuum-Seal
4
To begin vacuum-seal operation,
lower the lid.
8
Unplug when finished vacuum-
sealing bags.
8
5
Select Vacuum Level and
Seal Time. See page 4 for
recommendations.
NOTES:
•
To prevent overheating, allow
20 seconds between each bag
that is vacuum-sealed.
•
To ensure proper seal, keep the
lid closed during use.
•
Do not let moisture into the
vacuum port. This may damage
the motor.
(cont.)
6
Push the Vac&Seal button. Press
down and hold the lid during
vacuum-sealing or use locks.
w CAUTION Burn Hazard.
Seal bar is hot. Avoid touching it.
7
Wait to open the lid until unit
beeps and light turns green.
Remove the sealed bag.