Using The 12 V Dc Output 8 A With Cigarette Lighter Adapter; Switch On Lighting - ULTIMATE SPEED UMAP 12000 A2 Instrucciones De Funcionamiento Y De Seguridad

Note: Charging is not possible if the portable jump starter
1
with power bank is being charged itself.
z Using the 12 V DC output 8 A with
cigarette lighter adapter
Press the power switch
„
Connect the 12 V/8 A cigarette lighter adapter
„
the 12 V DC output 8 A
with power bank
device.
Note: You will not be able to use the portable jump starter
with power bank
Caution: Only use the 12 V/8 A cigarette lighter
adapter delivered with your product
short circuit if you use third-party adapters.
z Switch on lighting
Light mode
When switching on the LED lights
„
power button
Press and hold the power button
„
to turn the LED lights
Flash mode
To switch on the LED light
„
first press and hold the power switch
Then the LED light
Briefly press the power switch
„
LED light will switch to flashing mode.
7
.
to your portable jump starter
3
1
und then connect it to your terminal
1
if it is being charged.
7 for 3 seconds.
2 off again.
2
2 will be permanently lit.
Using the device
14
. There is a risk of a
2 , hold down the
7 again for 3 seconds
in flashing or SOS mode,
7
for 3 seconds.
7 once again and the
GB/MT
on
14
115