Using The Jumpstart Feature - ULTIMATE SPEED UMAP 12000 A2 Instrucciones De Funcionamiento Y De Seguridad

Using the device
Shortly before the undervoltage protection circuit is acti-
vated, the last blue indicator light
As soon as the undervoltage protection circuit is activated,
the last blue indicator light
longer be delivered. Please charge the portable jump starter
with power bank
z Using the jumpstart feature
When using the jumpstart, make sure that at least 3 indi-
„
cator lights
Step
1. Connect
the jump
lead of
10
the porta-
ble jump
starter
with
power
bank to
the jump-
start outlet
of the
9
portable
jump
starter
with
power
bank .
1
112 GB/MT
8
1
again.
are permanently illuminated.
8
LEDs
Red Error LED
is continu-
13
ously lit on the
jump lead .
10
Green Start
LED 12 and
the red Error
LED flash
13
alternately.
will start to flash.
8
flashes and power will no
Meaning/
Error
The voltage
determined in
the portable
jump starter
with power
bank is
1
not enough to
start the car.
The portable
jump starter
with power
bank is
1
ready.
Solution
Charge the
portable
jump starter
with power
bank .
1
Carry on with
step 2.