Controls & Indicators - PSC HS1250 Manual Del Usuario

Controls & Indicators
The scanner has a volume switch,
speaker and indicator light. Note that
two of these items, the speaker and vol-
ume switch, are located beneath the
scanner's top
Volume Switch
The scanner has three volume settings. When you
press the switch or scan this label, the scanner sounds
a tone three times at the new setting. Each time you
press the switch or scan the label, the scanner sounds
the next highest volume until it reaches the highest
volume. After reaching the highest volume, pressing
the switch again will return the volume to the lowest
level.
This volume setting will be lost when the scanner is turned off. Use the pro-
gramming bar codes found in the Programming Guide for this product to per-
manently change the volume. The Manuals CD contains a copy of this
programming Guide.
2
cover.
Increment Volume
HS1250 Scanner