Indicator Lamp - PSC HS1250 Manual Del Usuario

Indicator lamp

Lamp
Activity
Off
On dim
Flashes once
Flashes once
per second
Flashes twice
per second
Flashes
repeatedly
Speaker
The speaker produces an audible indication of scanner operation. It sounds a
normal tone, an alternate tone, or error tones (a repeating series of tones).
•
•
•
Quick Reference Guide
No power or scanner is not operational
Scanner is on and ready for operation.
Occurs when a bar code is read. Accompanied by good read tone from
the speaker (if on)
Scanner has automatically gone into "Sleep Mode".
Scanner is in Programming Mode; will not read or send data to the host
Along with repeated tones, indicates scanner failure
Normal Tone - sounds when a bar code label is successfully decoded
and transmitted to the host.
Alternate Tone - has a lower pitch than the normal tone. It sounds in
Normal Mode if the scanner cannot successfully read a bar code label
or reads a bar code but is not programmed to transmit that symbology
to the host. It sounds in Programming Mode when a programming
label is rejected because the scanner cannot use that feature (e.g. trying
to set Baud Rate for any interface other than RS-232).
Error Tones - alert the operator when a problem is detected. See the
User's Guide for details.
Indication
3