Decimal Point Position & Division Value; Backlight; Accumulation; Accumulation Check - Baxtran IMP20 Manual De Usuario

4.8 DECIMAL POINT POSITION & DIVISION VALUE
If modify division value, press
input ( ) then press
1 P 1

4.9 BACKLIGHT

Press key to turn on / off the backlight.

4.10 ACCUMULATION

Key is used in line by line printing mode, to accumulate the weights and quit the mode.

4.11 ACCUMULATION CHECK

In line by line printing mode, press

4.12 PRE-SET TARE

Press key , it displays
procedure and decimal dot will appear on the corresponding position.

5. PARAMETER SETTING

5.1 ESSENTIAL PARAMETER SETTING

Press and input
18
SET
F1 1
F2 1
F3 05
F4 4
*******************************
Ser No.
0001
0002
0003
......................................
it displays
P 0
, it displays , input
d 1
and check the total weights.
, input tare value like 879kg, then press
P 0
, then press
Zero function range setup, choose 0 means 0%, 1 means 2%, 2 means 20%, 3 means 50%,
4 means 100%, then press
Zero function range of power on, choose 0 means 0%, 1 means 4%, 2 means 50%,
3 means 100%, then press
Zero-tracking range, choose 5 means 0.5e, 10 means 1e, max is 20 means 2e,
then press to confirm.
Baud rate of wireless, choose 1 means 600bps, 2 means 1200bps, 3 means 4800bps,
4 means 9600bps, then press
WEIGHT MEMO
No.: 0000
Date: 11/04/30
Time Weight (kg)
Auto Enter
13:24:53 1000
13:25:24 2000
13:25:39 1000
Auto Quit
means no decimal point of division value, e.g.: to set division 0.5kg,
( ) then press
5 d 5
. If the device has decimals, do the same
to confirm.
to confirm.
to confirm.
USER'S GUIDE IMP20
. Finished now the division value is 0.5kg.
EN EN
19 19