fortress V Serie Instrucciones De Instalación página 28

Universal Bracket (UB) Adapter & Cup
Fig. 3
Stair
Bracket Base
Barrel
Bracket Adapter
Fig. 4
Step 4: Top Bracket Installation Continued
1. Use Spring Punch to mark holes. As shown in Fig. 1 below.
2. Drill out holes with a 3/16" [5mm] drill bit. As shown in
Fig. 2 below.
3. Use T-25 screws to attach the UB base to the post. Begin
with top hole then bottom. As shown in Fig. 3.
4. Keep bracket base centered as you install second screw.
5. Insert barrel & screw to re-assemble UB-05 Adapter.
6. Tighten barrel & screw. As shown in Fig. 4.
7. Use Phillips Head Thread-Cutting Screws to attach UB
Cup to UB Adapter. As shown in Fig. 5.
Fig. 1
28
Screw
Stair
Mark top and bottom
location of Stair Bracket
on post
Position inside
bottom of
cup flush with
bottom face
of rail
V-SERIES: VERTICAL CABLE INSTALLATION
Stair Bracket Cap
Stair
Bracket Cup
Phillips Head
Thread-Cutting Screws
Fig. 5
Fig. 2