Steelcase Ology Manual Del Usario página 4

®
WARNING
Pinch points. Keep Clear.
Risk of Serious Injury.
If not used as intended, moving
worksurfaces can pinch and
cause injury or property damage.
Always follow these instructions:
1. Keep height-adjustment range free from
obstructions above and below the worksurface.
2. Plan for a minimum 1" gap against a wall or panel.
3. Plan for a minimum 1" gap to adjacent furniture.
1
2
WARNING
This powered, adjustable height desk appliance is not intended for use by persons (including children)
with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they
have been given supervision or instruction concerning use of the appliance by a person responsible for
their safety. Children should be supervised to ensure that they do not play with the appliance.
BASES-ONLY WARRANTY LIMITATIONS AND POTENTIAL FOR INJURY: The use of worksurfaces
that do not comply with the Steelcase defined criteria and limitations could cause personal injury or
property damage due to pinch points, instability, or other problems, and VOIDS all Steelcase warranties,
expressed or implied.
The use of worksurfaces that do not comply with Steelcase criteria VOIDS any Steelcase claims of
compliance with ANSI/BIFMA, UL, LEED, or other applicable requirements. The use of non-Steelcase
worksurfaces on Steelcase adjustable-height bases may NOT be accepted as compliant to municipal
electrical codes or OSHA federal workplace standards, because this use does not create an NRTL (UL,
ETL, etc.) listed product. Steelcase is not responsible for the ultimate determinations of compliance for
3
height-adjustable bases with a non-Steelcase worksurface, and assumes NO liability for their compliance
with standards when height adjustable bases are used without a Steelcase worksurface as intended.
Worksurface Criteria and Limitations
The use of non-Steelcase worksurfaces is NOT recommended. Any use of a non-Steelcase worksurface
requires additional investigation by the customer regarding the appropriateness for use. It is the sole
responsibility of the customer to determine the suitability and safety of the selected worksurface
construction and attachment means. The following information is provided as a guideline, but does not
address all potential issues. Customers should seek professional guidance as to the appropriateness of
their chosen worksurface.
1. This appliance is not intended for use by persons (including children) with reduced physical, sensory or
mental capabilities, or lack of experience and knowledge, unless they have been given supervision or
instruction concerning use of the appliance by a person responsible for their safety.
2. Children should be supervised to ensure that they do not play with the appliance.
RISK OF SERIOUS INJURY:
Page 4 of 40
P/N 103781401
Doc # 71606 Rev L