BOZZA 7029-Premium Instrucciones De Montaje página 42

Container Tube
Plunger Handle
Tube Cap
Screw
(For Gun Head)
Lip
Plung
Piston Rod
Slot
Fig. 5
4.Screw and re-assemble tube cap from the container tube.
5.Insert the open end of grease container ass'y into lubricant of bulk
container.
Draw back piston rod slowly while pushing the grease container ass'y
deeper into the lubricant to prevent air pocket. See Fig.6
6.When piston rod is fully extended, latch the groove of piston rod into the
slot of tube cap.
7.Screw grease container ass'y into gun.
8.Release the piston rod from slot and push it all the way in.
9.This gun is ready to use. If your gun fails to work, to remove the air,
procedure as Remove Air Pocket.