BOZZA 7029-Premium Instrucciones De Montaje página 45

Inserting Battery Pack
Inserting Battery Pack
1. Load the battery pack, contacts first, into the grease gun.
2. Push battery pack fully forward into its locked position.
3. To remove battery pack, push down on locking tab and slide battery
pack out. See Fig.9
NOTE: If battery pack is left in tool for an extended period, the battery will
discharge completely and will require recharging.
IMPORTANT: Should your battery terminals become corroded and cause
poor electrical contact, clean the terminals using a fine emery cloth.
Always keep cover on the battery terminals.
Cover
OPERATION: Air pockets in the lubricant will cause the gun to lose its
output. Only continue to hold trigger switch meanwhile press/release air
vent valve until trapped air is removed.
IMPORTANT: Do not continue to hold down trigger if grease gun is stalled.
This could damage the motor or cause fire.
USE AND CARE
Clean The Terminals
Locking Tab
Fig. 9