Medion LIFE S63064 Manual De Instrucciones página 216

DE
Dialling mode
Here you can set your telephone to the dialling mode of your network
provider. You can choose between tone dialling and pulse dialling. The
factory setting is "Tone Dialling". That is the most commonly used dialling
mode nowadays. Pulse dialling may be required for some older telephone
systems.
Ask your network provider which dialling mode is required for your
connection.
 In the "Base Settings" menu, choose the "Dialling Mode" entry and
confirm with "Select".
The "Tone dialling (DTMF)" setting is highlighted.
If you want to change the dialling mode, select "Pulse dialling" and confirm
with "Select".
Flash time
Here you can set your telephone to the specifications of your network
provider or your PABX. You can set the flash times to the following stages:
Short (100 ms), Medium (250 ms) or Long (600 ms).
Ask your network provider which settings are required for your connection or
read the operating instructions of your telephone system.
 In the "Base Settings" menu, choose the "Flash Time" entry and
confirm with "Select".
 If you want to change the default value, use the  or  keys to select a
different flash time and confirm with "Select".
Changing the system PIN
Certain settings can only be changed after you have entered the PIN
(personal password). The factory default PIN is set to "0000". In this
sub-menu you can specify any four-digit PIN yourself.
EN
61