Reese Towpower 37041 Instrucciones De Instalación

SOLON, OHIO
WARNING: DO NOT LUBRICATE THREADS, BOLT FAILURE MAY
OCCUR DUE TO EXCESSIVE TIGHTENING.
WARNING: DO NOT DRILL OR WELD TO THIS HITCH.
1/2" FLAT WASHER
1/2" LOCK WASHER
1/2" NUT
1/4
1/2" X 1 " BOLT
1/2" FLAT WASHER
1/2" LOCK WASHER
1/2" NUT
FLANGE
'95-'97 BLAZER,
'
1. Spare tire will need to be loosened for hitch installation.
2. Using the 1/2 x 1/4 bolts, 1/2
" 1 "
3. Mount hitch to the frame using the bolt plates as spacers between the frame and the hitch. Install 1/2
lock washers, and nuts. Bolt through the existing holes in the side of the frame.
4. Using the hole in the flange as a guide, drill 1/2
insert through the frame and install 1/2
nuts to 70 ft•lb.
5. Torque 1/2
"
6. Retighten the spare tire.
For Installation Assistance or Technical Help, See our Web Site at
www.CequentConsumerProducts.com or Call 1-800-234-6992
37041IN
INSTALLATION INSTRUCTIONS
95- ' 97 JIMMY, AND ' 96-
lock washers, and 1/2
"
"
flat washer, lock washer, and nut.
"
04-04-114
MULTI - FIT
USE ONLY REESE SUPPLIED OR APPROVED BOLTS, LOCKNUTS,
AND WASHERS TO INSTALL THIS HITCH
3/4
1/2" X 1 " BOLT
BOLT PLATE
BOLT PLATE
1/2" X 1
1/2" LOCK WASHER
1/2" NUT
FRONT
REAR
' 97 BRAVADA
nuts install the frame straps to the hitch brackets. Leave the bolts loose.
"
holes through the bottom of the frame. Install 1/2
© 2014
IMPORTANT NOTES
TOOLS REQUIRED
1/2"
3/4"
3/4"
TORQUE WRENCH
3/4
" BOLT
SAFETY GLASSES
FRAME STRAP
x
"
bolt through bolt plate and
"
CEQUENT CONSUMER PRODUCTS
Product No.
37041
SMALL PARTS
PACKAGE 37628
DRILL BIT
SOCKET
WRENCH
bolts, flat washers,
1 3/4 "
1