Connections; Connect To Fm Antenna; Connect To External Audio Device; Connect Power - Lenco IPT-100 Manual De Instrucciones

8 M/CLOCK
- Press this button to set the clock.
- Press and hold this button to search radio
stations automatically.
- Preset station for tuner.

Connections

Connect to FM Antenna

Connect the supplied FM wire antenna to the FM
Antenna socket on the unit.
I f r e c e p t i o n i s p o o r , c o n n e c t t h e o u t s i d e
antenna.
Note:
Before attaching a 75 ohm coaxial lead (the kind
with a round wire going to an outside antenna),
disconnect the supplied FM wire antenna.
Caution:
To avoid noise, keep antennas away from the
system, the connecting cord and the AC power
cord.

Connect to External Audio Device

You can also listen to an external audio device
through this unit.
Using AUX IN socket
Connect audio cables to:
- The AUX IN sockets on this unit.
- The audio output sockets on external audio
device.
Note:
Press FUNCTION button on main unit or remote
control to select AUX 1(AUX 2) for your connection.

Connect Power

Caution:
- Risk of product damage! Ensure that the power
supply voltage corresponds to the voltage
printed on the back or the underside of the
unit.
- Before connecting the AC power cord, ensure
you have completed all other connections.
Connect the AC power cord to:
- the AC~ socket on this unit.
- the wall socket.

Install Remote Control Batteries

Prepare the Remote Control

The provided Remote Control allows the unit to
be operated from a distance.
Even if the Remote Control is operated within

the effective range (6m), remote control
operation may be impossible if there are any
obstacles between the unit and the remote
control.
If the Remote Control is operated near other

products which generate infrared rays, or if
other remote control devices using infrared
rays are used near the unit, it may operate
incorrectly. Conversely, the other products
may operate incorrectly.

Replace the Remote Control Battery

English 4