LaCie LaCinema Guía De Instalación Rápida página 7

Tabla de contenido

Publicidad

3. Turn the drive over and remove the top shell.
4. Slide the drive, label facing up, onto the bottom plate until the SATA connector plugs
into the LaCinema Classic Bridge's internal SATA port.
5. Secure the disk drive in the casing by inserting the four screws (included) as indicated.
5
3
4
6. Replace the casing by fi rst aligning the video ports on the bottom plate with the cutouts
on the top shell and then pressing down until it clicks.

Publicidad

Tabla de contenido
loading

Tabla de contenido