Suzuki DL650L2 Instrucciones Para El Montaje página 3

Installation
Installation
1. Apply the Cushion D to the
inside of Under Cowling B as
shown in the illustration.
2. Install the Bracket (F) E with
the Bolts H.
Tighten the Bolts H to the
specified torque.
 Bolt H : 10 N·m
3. Remove the two clutch cover
bolts and install the Bracket (R)
F with them.
Tighten the clutch cover bolts to
the specified torque.
 Clutch cover bolt:
4. Remove the two generator
cover bolts and install the
Bracket (L) G with them.
Tighten the generator cover
bolts to the specified torque.
 Generator cover bolt:
(1.0 kgf-m, 7.0 lbf-ft)
10 N·m (1.0 kgf-m, 7.0 lbf-ft)
10 N·m (1.0 kgf-m, 7.0 lbf-ft)
58 ± 2 mm
(23 ± 0.1 in)
GENUINE SUZUKI ACCESSORIES
3/4
1 ± 1 mm
(0.1 ± 0.1 in)