Axis Ip Utility - Single Camera/Small Installation - Axis P1311 Guia De Instalacion

AXIS P1311 Installation Guide Page 7

AXIS IP Utility - single camera/small installation

AXIS IP Utility automatically discovers and displays Axis devices on your network. The application
can also be used to manually assign a static IP address.
Note that the computer running AXIS IP Utility must be on the same network segment (physical
subnet) as the AXIS P1311.
Automatic discovery
1. Check that the AXIS P1311 is connected to the network and that power has been applied.
2. Start AXIS IP Utility.
3. When the AXIS P1311 appears in the window, double-click to open its home page.
4. See page 9 for instructions on how to assign the password.
Set the IP address manually (optional)
1. Acquire an unused IP address on the same network segment as your computer.
2. Select AXIS P1311 in the list.
Assign new IP address to selected device and enter the IP address.
3. Click the button
4. Click the Assign button and proceed according to instructions.
5. Click the Home Page button to access the camera's web pages.
6. See page 9 for instructions on how to set the password.