Step 1 Check The Parts And Tools; Parts Required - Samsung DW80H99 Serie Guia De Instalacion

installing the dishwasher
Be sure that you or your installer follow these instructions closely so that the new
dishwasher works properly and that you are not at risk of injury when washing dishes.

STEP 1 CHECK THE PARTS AND TOOLS

Before starting on the installation, prepare all the necessary tools and parts required to install the
dishwasher. This will save installation time and simplify the installation process.

Parts required

Provided with the dishwasher. Check when you unbox the dishwasher in Step 5.
4 Installation Brackets
Kick Plate
Not provided
Power cable
Hot water supply line
Hose clamp
For the hot water supply line – We strongly recommend using
compression fi tting or a fl exible stainless steel braided hot water supply line.
[Warning: Do not use plastic tubing. Plastic tubing can deteriorate over time and cause a leak inside
the tube fi tting.]
You also need a 90° elbow with
your hot water supply line (copper tubing/compression fi tting or braided hose) on the other.
For the power cable, we recommend a jacketed 12-2 cable with ground. Note that some local codes
may require the cable to have a BX style metal jacket.
6_ installing the dishwasher
DW80H9950US-00151A-06_EN_150216.indd Sec3:6
2 Screws
(For the installation Drain Hose
bracket)
Hose Fixer
(for the kick plate &
(for Drain Hose)
Hose Fixer)
Twist on wire
Strain relief
connector
/
90° Elbow( 3 ") Tube fi ttings
8
Air gap Rubber connector
/ " N.P.T. external pipe threads on one end and a fi tting sized to fi t
3
8
Hose Clamp
(for Drain Hose)
7 Screws sound-absorber
(in front of Base)
(ON SOME MODELS)
Electrical tape &
Standard duct tape
Tefl on tape or sealing
®
compound
2 Screws for the side
walls
[Length : 1" (25mm)]
/ " minimum O.D. copper tubing with a
3
8