Cleaning And Storage - AEG KH 4225 Instrucciones De Servicio

Ocultar thumbs

Contenido

Tabla de contenido

Idiomas disponibles

If the registration was done successfully, a short beep

sound will be heard from the headphones. The blue light

will rapidly flash twice. Then the blue light flashes twice

every 5 seconds. If possible, adjust the volume of the

player to a suitable listening volume.

NOTE:

• Depending on the device manufacturer, you need

to perform the registration (PAIRING) again to con-

nect the devices.

• The Bluetooth compatibility cannot be ensured for

devices (e.g. mobile phones) getting released in

the future.

• To ensure an optimal connection, make sure that

the battery of your player is completely charged.

• Some of the mobile phone brands have an energy-

saving mode. Deactivate the energy-saving mode

as it can otherwise result in problems during the

data transfer through Bluetooth.

• To be able to transfer audio data, Bluetooth needs

to stay activated in your player. Observe the opera-

tion manual of your player.

• If there is no Bluetooth connection, the red light will

flash every 3 seconds.

Operation

The device is equipped with multi functional buttons. For

different functions press the respective button briefly or press

and hold.

On/Off

• Press and hold the button approx. 5 seconds to turn the

player on. A beep sound will be heard from the speaker

and the light (1) will flash blue.

NOTE: Automatic connection

If supported by your player (e.g. mobile phone), the de-

vices will be connected automatically. The prerequisite

for this is:

• The devices were already connected with each

other.

• Bluetooth is activated in your player.

• Press and hold the button again approx. 5 seconds to

turn the player off. The devices are separated. The light

will quickly flash red and will then go out.

NOTE:

Turn off the headphones when you are not using them

to conserve the battery.

Replay/Pause

• Press the multifunction button in order to interrupt the

playback.

All manuals and user guides at all-guides.com

• Press the multifunction button again in order to continue

Depending on the device manufacturers, models, and

software versions you need to start the music playback in

your player.

Adjust Volume

Keep the button pressed in the "+" or "-" direction in order

to adjust the volume. Release the button if you have set the

desired volume.

Listening to music at high volume can damage your hear-

ing.

If the maximum volume on the headphones has been

reached, a beeping sound will be heard.

Select Music

• Press the > button in order to select the next track.

• If you press the < button, the current track will be played

Your player must support this function.

Accept/terminate a conversation

• Push the button to accept an incoming call.

• To end the conversation, push the button one more time.

During an incoming telephone call, the music playback will

stop. After terminating the conversation, the music piece

will continue to be played back.

Number redial

You would like to call the last dialed number again?

• Press the button until you hear a beep.

• If you now release the button, the previously dialed num-