DELTACALOR TELICA WIFI PLUS Manual De Usuario Y De Instalación página 44

FIRST SWITCHING ON AND INSTALLATION
When the thermostat is switched on or after the unit has been reset/reset, this first screen is
displayed.
The number corresponds to the software version of the unit.
The second screen depends on the status of the thermostat:
•The first time the unit is started, the user will be able to directly configure the WIFI connection,
the date and time of day.
To configure a radiator and associate it to your WIFI network with the "DELTACALOR
CONFORT" application go to page 60.
After a power cut, this will be the screen page of the current mode.
After a unit reset or a very long power cut, the screen page of the modification time will be
displayed.
[ 44 ]