Transferring Photos From A Bluetooth Device (Optional) - Sagem Photo Easy 260 Manual Del Usuario

All manuals and user guides at all-guides.com
Liasse AZUR_GB.book Page 14 Lundi, 23. mai 2005 11:31 11
You can now:
• start printing the transferred photograph, after setting the print format and
number of copies if required,
• or, transfer another photo from your device, which is then added to the
photo(s) already stored in the printer. At the end of each transfer, the total
number of photographs stored is displayed on the printer screen (the one with
the highest number being the last one transferred),
• the same operations as described in the previous chapters can now be
performed before starting to print the photographs: (selecting the photographs
to be printed, selecting the format, selecting the number of copies).
You can now:
• start another print job, after selecting different parameters (photograph
number, format, number of copies) if required,
• or erase all selected photos. To do so, hold down the
for 3 seconds.
T
RANSFERRING PHOTOS FROM A
( )
OPTIONAL
Warning: if a memory card is inserted in the printer, you cannot access the Bluetooth
transfer mode.
Warning: if you have started transferring photos by infrared, you cannot transfer your
photos by Bluetooth until you first have cleared the internal memory by holding
down the key for 3 seconds.
The optional Bluetooth adapter for the printer is a fast and effective solution to
replace a connection by cable with a wireless connection.
The adapter transforms the photo printer into a Bluetooth receiver, allowing you
to print photos from devices equipped with Bluetooth technology, such as mobile
phones, PDAs, PCs and the like.
B
LUETOOTH DEVICE
- 14 -
key