Connect Your Printer - Sagem Photo Easy 260 Manual Del Usuario

All manuals and user guides at all-guides.com
Liasse AZUR_GB.book Page 26 Lundi, 23. mai 2005 11:31 11

Connect your printer

Make sure that both the PC and the printer are switched on. Never apply force
when plugging in connectors into the equipment as this could damage both the
cable and the connector.
Connect your photo printer (USB port (B)) to PC using an USB cable.
Recognition between the two devices is automatic.
Using your printer
Your printer can operate in two different modes:
• Print mode, selected by default.
• Memory Card Reader mode.
To print from PC, the Print mode must be activated.
Printing and infra-red or Bluetooth transfers are not possible. To quit this mode,
refer to the following chapter.
B
- 26 -