Klarfit Bogera X Manual De Instrucciones página 20

EN
20
• Fit the Left Handle Bar (11) to the Left Front Swing Arm (4) with one
Hex Head Bolt (14), one Flat Washer (19) and one Nylon Nut (24). Then,
secure the parts with Adjustment Knob (38). Repeat the same for the
Right Handle Bar (6) at the Right Front Swing Arm (4).
• Turn the Plastic Hex Plugs (27) at the pipe ends of the Rear Ground Pipe
(9) to make sure that the machine is positioned firmly on the floor.
2