Klarfit Bogera X Manual De Instrucciones página 23

EN
Pull the locking Pin (41) out of the Front Stabilizer (2) and fold down the
Front Stabilizer (2) as shown on drawing A. Secure both them with Locking
Pin (41) as shown on drawing B. Unscrew the Adjustment Knob (36) to re-
lease Ab-Pad Support Tube (10).
Unscrew the Adjustment Knob (37) to loose the Rear Upright Pipe (1) from
the Handle Joint (3). Fold the Pedals (33) upward. Align the holes in the Front
Swing Arms (4), the Rear Swing Arms (5) with the loop welded on the Rear
Upright Pipe (1) and insert the locking Shaft (40) through all parts to secure
the unit in folded position.
23