Publicidad
RECESS MOUNTING
4. Place cabinet in rough-in and make sure cabinet is installed square, plumb, and level.
5. Install a #10 X 2" screw [SS674] through top mounting hole in cabinet side and screw into wall stud as shown. Do not over-tighten
screws or cabinet box may deform.
6. Once cabinet is installed square, plumb, and level, install #10 X 2" screws into wall studs through the three remaining mounting
holes. Do not over tighten screws.
4
6
5
[SS674]
#10 x 2" Hélice / Tornillo
Part no. CB-209-1350 10/27/20
PL Portray Cabinet
© 2020 Robern, Inc. 701 N. Wilson Ave. Bristol, PA 19007 U.S.A.
800.877.2376
www.robern.com
7
Installation instructions
Publicidad
Capítulos
