Publicidad
FINAL ASSEMBLY
4. Press the Shelf Hole Plugs [SS143] into the unused holes inside the cabinet. Place the Screw Head Caps [SS672] over any exposed
screw heads.
5. Install Robern Logo Coverplate [211-1329] into unused electrical access hole.
6. Insert clear Shelf Clips [221-1376] and [211-1377] into the holes in the back channel on the sides of the cabinet.
7. Push the back of the shelf into both the left and right clips (A). Snap the shelf down into the clips (B).
4
6
© 2020 Robern, Inc. 701 N. Wilson Ave. Bristol, PA 19007 U.S.A.
800.877.2376
www.robern.com
Installation instructions
5
7
9
A
B
Part no. CB-209-1350 10/27/20
PL Portray Cabinet
Publicidad
Capítulos
