Final Assembly - Robern PL PORTRAY Serie Manual De Instrucciones

FINAL ASSEMBLY

1. Align door and reattach hinges to mounting plates until audible click is heard. Ensure all hinges are fully seated before attempting to

adjust door.

2A. For small or light doors, the slow close feature can be deactivated on one of the hinges.

2B. Door must be closed once for the deactivation to be complete. To reactivate, move switch back to original position.

NOTE: The door hinges have a three-way adjustment feature. These adjustments can be made using a #2 Phillips Head screwdriver.

3A. Side adjustment – Rotate front screw to increase or decrease door overlay.

3B. Height adjustment – Rotate cam screw on mounting plate to adjust door.

3C. Depth adjustment – Rotate rear spiral tech cam screw to adjust door gap.

800.877.2376

www.robern.com

Installation instructions

Part no. CB-209-1350 10/27/20

PL Portray Cabinet

Tabla de Contenido