Bell'O ClassicFlame 36HF320FGT Manual Del Usuario página 14

Operation
Installation - Built In Construction
3
Loosening the Strain Relief Bracket
Remove the two pre-attached Screws holding the power
cord strain relief bracket.
5
Connecting the Power Supply Wire
Connect the power supply wire. Please operate the fireplace to make sure all the functions of the fireplace are working well to
avoid any re-work for mistaken connection.
A474
4
Strain Relief
Junction Box Cover
14
Removing the power cord Assembly
Remove the power cord and strain relief assembly.
Terminals
Loosen the 3 screws
www.tsicustomerservice.com
Power Cord Assembly