Settings - Sputnik Engineering MaxVisio Documentación Del Dispositivo

4 Settings

To access the respective menu, please press the associated text on the display. To
access a higher-level menu, please press
Start screen
29
.
Main menu
Day view
Month view
Year view
Events
(Mode 2 only)
Current measured
values (Mode 2 only)
Device selection
Settings
Searching for devices
(Mode 2 only)
Backlight
Payment
Software
Language
Start page
Shows the current output, yield, payment, and system state.
Day view
Shows the output curve for one day. Select the required date with buttons
next to the date and the device with buttons
Month view
Shows the daily yields for one month on a per-device basis. A new daily value ap-
pears each day.
Year view
Shows the monthly yields for one year on a per-device basis. A new monthly value
appears each month.
Events
Shows the last 10 events for each device. Select the required device with buttons
and .
Current readings (operating mode 2 only)
Shows current readings for the individual devices within the network. Select the re-
quired device on the "Device selection" page or with buttons
Searching for devices (operating mode 2 only)
During start-up the devices present in the network have to be located. See section
3.2 "Start-up - Operating mode 2". Please note: a new device search will delete any
saved data!
Backlight
The backlight duration can be set here.
Payment
The payment rate (euro cents per kWh) can be set here.
Software
Select operating mode 1 for operation in conjunction with MaxWeb or operating
mode 2 for stand-alone operation. See also section 6 "Software updates". Please
note: changing the operating mode will delete any saved data!
Language
The display language can be selected here. Possible options are German, English,
French, Spanish or Italian..
and
and next to the device number.
and .
en
30