More About The Foot Controller - Ibanez MIMX150H Manual Del Usuario

More about the foot controller

You can use the separately IFC2(sold separately) as a controller for the
MIMX. If you connect the IFC2, you'll be able to use the
section, and use the foot switches to switch channels.
e
d
20
PEDAL FX
9
a
b
f
B
c
A
Operations
a
Pedal: Controls the pedal effect that's selected on the amp.
b Up switch: Switches to the next higher memory than the currently
selected memory. (Does not operate in manual mode.)
c Down switch: Switches to the next lower memory than the currently
selected memory. (Does not operate in manual mode.)
Press
b
d Foot switch jack: Connect this to the amp in order to use the foot
switches.
e
Pedal effect jack: Connect this to the amp in order to use the pedal
effect. A circuit inside the IFC2 allows the MIMX to recognize that
the pedal is connected.
f Mode switch: This switch determines how the pedal will operate.
Set this as appropriate for your playing style.
The effect will remain on even when the pedal is in the minimum
A
position (fully returned toward yourself).
The effect will turn off when the pedal is in the minimum position
B
(fully returned toward yourself).
c simultaneously to activate the tuner.