Before You Start; Network Setup - WISEUP SHOP WIFI07 Guia Del Usuario

-1× 8GB Micro SD Card (fitted into the Micro SD card slot already)
III. Before You Start
3.1. Get the Clock Part Ready
3.1.1. Open back cover, put the backup battery in place and plug it into AC power
using the power adapter included, time display will be light on.
3.1.2. Press the Set Button once and the hour will start flashing, then press the
Plus Button to adjust the current hour.
3.1.3. Press the Set Button once again to save the hour setting and the minute will
start flashing, then press the Plus Button to adjust the current minute.
3.1.4. Press the Set Button to save the minute setting. Press the Plus Button to
choose 12-hour or 24-hour display mode, then press the Set Button once to save
the setting.
3.2. Get the WIFI Camera Part Ready
3.2.1. Please make sure the 8GB Micro SD card provided has been formatted
already and is securely fitted into the camera's SD card slot. If you want to use a
larger Micro SD card, we recommend you to use SDHC Class 10 Micro SD cards.
3.2.2. Power the camera on by pressing and holding the Power Button for 2
seconds. Wait about 15 seconds or so, you will see the LAN indicator light glow
solid yellow, which means the camera's WIFI signal is ready.
IV. Network Setup
4.1. Install the "Camwf" APP on your smartphone or tablet PC
Search for "Camwf" in Google Play Store and install it on your smartphone or tablet
PC.