WISEUP SHOP WIFI07 Guia Del Usuario página 3

4.2. P2P Connection Setup (LAN Mode)
4.2.1. Go to the WIFI or WLAN Setting page on your smartphone or tablet PC,
connect your mobile device to the camera's WIFI signal named "RT-*****". Wait for
the WIFI to be connected and your phone status bar will appear WIFI symbol as
below:
[Note]:
If the camera's WIFI signal cannot be found after a long time, please reset it (See
VIII) or recharge the backup battery only if the camera is powered by the backup battery
(See X).
4.2.2. Run the "Camwf" APP.
4.2.3. Add the camera to the "Camwf" APP as below:
Tap "+" icon > Search for the Camera > Tap the camera's UID > Tap OK.